Tote-Tank accessories and spares
Upgrade a tank, or put one back into service
A steel tote tank lasts for decades if its gaskets, valves and fittings are kept in order. Accessories can be fitted to tanks already in service to add a function. Spares replace the parts that wear. Both suit Protank Tote-Tanks and most standard stainless steel tote tanks with a 22 inch manway and 2 inch outlet.
Home / Offshore tanks / Tote-Tank accessories and spares
Accessories
Pressure and vacuum relief valve
Vents excess pressure and lets air in during discharge, which prevents the tank collapsing under vacuum. 2 inch or 3 inch, stainless steel or polyethylene, standard or low profile.
Combined fusible vent
A 3 inch fusible cap with a built-in pressure and vacuum vent, also in a flip-top version, with Viton, PTFE or EPDM seals.
Flame arrestor
Stainless steel 316 flame arrestor for tanks that carry flammable liquids.
Earthing boss
Stainless steel 316 boss with M10 stud, nut and washers, for bonding the tank during filling and discharge.
Level gauges
Sight glass gauge, float gauge with stainless steel rods and gauge guard, magnetic level indicator, or stainless steel tape indicator. Sized to the tank depth, for example 41 inch for a 350 gallon tank and 65 inch for a 550 gallon tank, with a matching level scale decal.
Manifold assembly
Connects the outlet valve and the level gauge in one fitting.
Heating and insulating jackets
Tote heaters for 350 and 550 gallon side or centre discharge tanks, insulating jackets, and heating jackets made to suit other sizes.
Riser stand
A set of four 200 mm (7.88 inch) risers with hardware that lifts the tank for more clearance under the outlet.
Drip tray
Made and fitted under the outlet to catch drips and small spills.
Camlock fittings and hoses
Stainless steel 316 camlock couplings, parts A, C and F, in 1 and 2 inch, and 2 inch transfer hoses with camlock couplers at both ends.
Valve options
Plastic valve protection cover, and a 2 inch stainless steel 316 reverse-handle valve.
Lifting lug retrofit kit
A standard tote tank is not designed for offshore lifting. This kit is welded to the tank’s pad eyes to give a single-point lift, and has been designed and prototype tested to DNV 2.7-1 and EN 12079. For tanks with a 54 × 54 inch footprint. The tank can still be stacked.
Certified lifting set
DNV type-approved four-leg wire rope sling set, recommended with the retrofit kit.
Spares
Manway
22 inch drum covers, flat, raised centre or eyebrow, with a welded 3 inch nipple and fusible cap or bung plugs as needed · 22 inch bolted clamp ring in stainless steel or zinc-plated steel · ⅝ inch bolt and nut · clamp ring rubber retainer
Manway gaskets
22 inch gaskets in EPDM, Buna-N, Viton or PTFE-coated EPDM, half wrap or full wrap
Fill and vent
3 inch fusible cap in stainless steel 316, standard or flip-top · fusible cap gaskets in EPDM, Buna-N, Viton or PTFE · fusible security chain · 2 inch bung plug, hex, cross hex, plated or food-grade · 2 inch polypropylene shipping plug
Outlet
2 inch ball valve with locking handle · 15 degree offset valve with adapter · 2 inch NPT 90 degree elbow in 304 or 316 stainless steel · 2 inch NPT × 3 inch nipple · 2 inch cam-lock adapter, straight or 15 degree · 2 inch dust cap with Buna-N, Viton or PTFE gasket · hose shank coupler
Decals and plates
Caution: vent tank · Vent before opening valve · Do not pressurise · Valve open and close · Maximum gross weight · Stacking · Level scale · No forks this side · Label plates · Custom decals
Offshore frame spares
Hold-down bar · frame door bolts and nuts · cotter pins · sling tag plate · four-leg wire rope sling
Tools and test kits
2 inch bung wrench · air retest kit for periodic leak testing · replacement gauge glass, standard or high pressure
Testing and recertification
We also inspect and retest tote tanks: visual inspection and leak test at the 2.5-year and 5-year UN retest intervals, pressure testing, and relief valve pop testing. Tank testing and recertification
Fluid-handling components
Moulded polypropylene components for hot and corrosive liquids in chemical processing, plating, laboratory drainage and waste treatment.
How to order
Send us the tank size, the make if it is not ours, and the part you need. A photo of the data plate helps us match the part.
Documents
Request a quote
Not sure which part fits? Send a photo and we will identify it.